Sonochemical conversion of CO2 into hydrocarbons: The Sabatier reaction at ambient conditions

In this study, we investigated an alternative method for the chemical CO₂ reduction reaction in which power ultrasound (488 kHz ultrasonic plate transducer) was applied to CO₂-saturated (up to 3%) pure water, NaCl and synthetic seawater solutions. Under ultrasonic conditions, the converted CO₂ products were found to be mainly CH₄, C₂H₄ and C₂H₆ including large amount of CO which was subsequently converted into CH₄. We have found that introducing molecular H₂ plays a crucial role in the CO₂ conversion process and that increasing hydrogen concentration increased the yields of hydrocarbons. However, it was observed that at higher hydrogen concentrations, the overall conversion decreased since hydrogen, a diatomic gas, is known to decrease cavitational activity in liquids. It was also found that 1.0 M NaCl solutions saturated with 2% CO₂ + 98% H₂ led to maximum hydrocarbon yields (close to 5%) and increasing the salt concentrations further decreased the yield of hydrocarbons due to the combined physical and chemical effects of ultrasound. It was shown that CO₂ present in a synthetic industrial flue gas (86.74% N₂, 13% CO₂, 0.2% O₂ and 600 ppm of CO) could be converted into hydrocarbons through this method by diluting the flue gas with hydrogen. Moreover, it was observed that in addition to pure water, synthetic seawater can also be used as an ultrasonicating media for the sonochemical process where the presence of NaCl improves the yields of hydrocarbons by ca. 40%. We have also shown that by using low frequency high-power ultrasound in the absence of catalysts, it is possible to carry out the conversion process at ambient conditions i.e., at room temperature and pressure. We are postulating that each cavitation bubble formed during ultrasonication act as a “micro-reactor” where the so-called Sabatier reaction -$C{O}_2+4H_2\stackrel{\mathit{Ultrasonication}}{\to }C{H}_4+2H_{2}O$ - takes place upon collapse of the bubble. We are naming this novel approach as the “Islam-Pollet-Hihn process”.     

Sonochemical approach for synthesis of zinc oxide-poly methyl methacrylate hybrid nanoparticles and its application in corrosion inhibition

Hybrid nanoparticles (HNPs) with zinc oxide and polymethyl metha acrylate (inorganic/ polymer) were synthesized through the exploitation of ultrasound approach. The synthesized HNPs were further characterized employing transmission electron microscopy and x-ray diffraction. ZnO-PMMA based HNPs exhibit excellent protection properties to mild steel from corrosion when gets exposed to acidic condition. Electrochemical impendence spectroscopy (EIS) analysis was accomplished to evaluate the corrosion inhibition performance of MS panel coated with 2 wt% or 4 wt% of HNPs and its comparison with bare panel and that of loaded with only standard epoxy coating., Tafel plot and Nyquist plot analysis depicted that the corrosion current density (I_corr) decreases from 16.7 A/m² for bare material to 0.103 A/m² for 4% coating of HNPs. Applied potential (E_corr) values shifted from negative to positive side. These results were further supported by qualitative analysis. The images taken over a period of time indicated the increase in lifetime of MS panel from 2 to 3 days for bare panel to 10 days for HNPs coated panel, showing that ZnO-PMMA HNPs have potential application in metal protection from corrosion by forming a passive layer.     

高频聚焦换能器声场的激光测量法

本文描述了一种使用激光测振技术测量高频聚焦换能器声场布的方法，并给出了使用该方法对一种高频聚换能器进行测量的结果，通过理论计算对结果的正确性进行了验证。     

超声波在多糖降解及提取中的应用

本文支综合介绍了超声波在多糖降解和提取中应用的研究进展．着重对超声波在淀粉，壳多糖，细菌多糖的降解和真菌多糖的提取中的应用作了较详细的阐述．     

Indium(I) iodide as a radical initiator: intramolecular cyclization of functionalized bromo-alkynes to substituted tetrahydrofurans

Aryl substituted α-carbonyl bromo-alkynes undergo facile cyclizations to the corresponding substituted 4-methylene-tetrahydrofurans using indium(I) iodide in acetonitrile under sonication in high yields. The reaction is predicted to proceed via a radical process initiated by InI and a plausible radical pathway is suggested.     

超声波在废橡胶再生中应用的最新进展

全世界每年产生大量废旧橡胶，它们需要很长时间才能降解，这既污染环境，又浪费资源，解决此问题的唯一方法是再生利用。在众多再生方法中，新近出现的超声波脱硫再生法，被认为是最有希望的方法，本文详细地介绍了这方面的最新进展情况。     

The potential role of ultrasound in differentiating solid and cystic swellings of the true vocal fold

This study was designed to investigate the potential role of ultrasound in the diagnosis of cysts of the true vocal fold. Materials and Methods: Grayscale ultrasound of the larynx was carried out in 29 patients with a swelling of the true vocal fold and dysphonia. The findings were then compared with those at subsequent microlaryngoscopy, in the majority of cases. Results and Conclusions: Whereas preoperative laryngeal ultrasound correctly predicted the surgical findings of a cystic lesion in only 5 of 11 cases, it correctly identified that no cyst was present in 15 of 16 instances when this had been queried. This study suggests that ultrasound may have some role in investigation of unilateral vocal fold pathology, but that further fine-tuning of the technique may be necessary.     

Acoustic wavefront imaging

We introduce a new class of experiments which provide graphic insights into the propagation of acoustic waves in anisotropic media. Simply stated, we have devised a means of observing the expanding acoustic wavefront from a point disturbance in a solid. The data may be viewed as a movie or a series of snapshots. The observed wavefronts represent the group-velocity surfaces of acoustic waves, which reflect the basic elastic anisotropy of the solid. The technique has been applied to coherent acoustic waves with frequencies in the megahertz range (at ambient temperatures) and to incoherent heat pulses in the hundred-gigahertz range (at liquid-helium temperatures). In this article, we first provide a pedagogical introduction to wave propagation in elastically anisotropic media, reviewing some early methods for visualizing acoustic waves. Next, we describe the “acoustic wavefront imaging” method and give representative results in crystals and composite materials. Finally, we show how this method relates to recent advances in phonon imaging and internal diffraction of ultrasound.     

Sonochemistry and its dosimetry

The effects of ultrasound originate primarily in acoustic cavitation. The cavitation bubbles collapse violently enough to lead to interesting chemical effects, known as sonochemistry. There is a great need to relate the efficiency of sonochemical reaction to the energy of ultrasonic irradiation used to produce them. In this paper, three OH radical dosimeters, Fricke dosimeter, terephthalate dosimeter, and iodide dosimeter, are compared from the analytical point of view. The dosimeters based on photometry, i.e., Fricke and iodide, produced reliable and reproducible results, but the sensitivity is not enough for special applications, such as chemical monitoring of single bubble cavitation. The dosimeter based on fluorometry, terephthalate dosimeter, offered high sensitivity, 1.2×10¹¹ molecules ml⁻¹. The effects of some experimental parameters in sonochemistry, i.e., solution temperature and the dissolved gas species, were evaluated with the dosimeters.     

超声场下苯酚吸附相平衡和均相催化剂氧化降解实验研究

测定了常规条件和超声场条件下苯酚在活性炭上的吸附等温线,并研究了超声再生活性炭和均相催化剂氧化降解苯酚实验.研究结果表明,超声场作用下苯酚在活性炭上的吸附等温线降低,平衡吸附量减少,被脱附下来的苯酚及时被Cu2 和Fe3 型催化剂氧化降解,吸附剂得到更彻底再生,避免了二次污染,而且再生后的活性炭均具有较高的二次吸附能力,对于处理低浓度含酚废水具有实际意义.